Mismatched cup holder insert woes!!

[CreativeVision]

Hi

As you’ll all know the inside base cover of the Porsche Macan centre console cup holder has a mismatched insert - ie driver side is different to passenger side (see attached image).

This is great if you use different diameter cups or if you want a thin water bottle in one and fatter cup in the other.

But my partner and I use the same style vacuum mugs - which sit much better in the wider (non ridge) holder.

Anyone know of a way to swap the insert for one that is flat both sides?? It’s easy to take out completely but then you’re left with a raw finish and holes which you wouldn’t want to see without cups nor have liquid dripping down!

Thanks for any help!

[Madelvic]

I could possibly 3D print you one......

[Deleted User 4325]

Could you 3d print me a 2022 Macan GTS please?

Any colour!!!

[Neil1911]

[Madelvic]

Could you 3d print me a 2022 Macan GTS please?

Any colour!!!

Only available in Crayon so far (this was at the PC this morning). You might be able to get one faster from Porsche than it takes me to print it

[Madelvic]

For fun I've made a 3D printed insert to level off the holders. I like it and might leave it in place