Eek! I've seen these used at OPCs, but surely there's a risk of scratching the paintwork, especially if a bit of grit or something gets caught by the blade?!
The ultimate question of life, the universe, and ......
- Wing Commander
- Posts: 19923
- Joined: Tue Oct 06, 2015 5:43 pm
- Location: Wiltshire
Eek! I've seen these used at OPCs, but surely there's a risk of scratching the paintwork, especially if a bit of grit or something gets caught by the blade?!
Simon
Sold: 2016 Rhodium Silver Macan 2.0
Sold: 2013 Platinum Silver 911 (991.1) C2
Sold: 2017 Carmine Red Panamera 4
Mine: 991.2 Carrera T Racing Yellow 06/04/2018
Sold: 2016 Rhodium Silver Macan 2.0
Sold: 2013 Platinum Silver 911 (991.1) C2
Sold: 2017 Carmine Red Panamera 4
Mine: 991.2 Carrera T Racing Yellow 06/04/2018
You just need to rinse it occasionally to prevent that problem, but if there was a bit of grit still on the car after washing, you'd cause damage with a drying cloth anyway? I was nervous at first admittedly, but now I swipe away with impunity!
Current: Macan S Diesel
Previous: 981 Cayman S
Previous: 997.1 GT3
Previous: 997.1 C2S
Previous: 981 Cayman S
Previous: 997.1 GT3
Previous: 997.1 C2S
- Wing Commander
- Posts: 19923
- Joined: Tue Oct 06, 2015 5:43 pm
- Location: Wiltshire
Fair play!
Simon
Sold: 2016 Rhodium Silver Macan 2.0
Sold: 2013 Platinum Silver 911 (991.1) C2
Sold: 2017 Carmine Red Panamera 4
Mine: 991.2 Carrera T Racing Yellow 06/04/2018
Sold: 2016 Rhodium Silver Macan 2.0
Sold: 2013 Platinum Silver 911 (991.1) C2
Sold: 2017 Carmine Red Panamera 4
Mine: 991.2 Carrera T Racing Yellow 06/04/2018
http://chainspeed.co.uk/products/bruhl- ... 94QAvD_BwE
Personally I'll leave it to the Romanian boy's!
Personally I'll leave it to the Romanian boy's!
I used to use one of those blades but after getting into detailing a few years ago my detailer said throw that blade in the bin straight away!Wing Commander wrote: ↑Sat Mar 17, 2018 2:38 pm
Eek! I've seen these used at OPCs, but surely there's a risk of scratching the paintwork, especially if a bit of grit or something gets caught by the blade?!
Basically you never want to drag anything across your paintwork ever as you never know what is on your blade, cloth or paint at any moment.
Even when drying it is more of a pat down and absorb as opposed to rubbing the cloth across the paint. A bit particular perhaps but seems to be best practice in the long term!
That's some cloth action. If most of those are for the exterior, can I suggest de-ionised water (get an Aqua Gleam 0 or 20ppm or both) and an air blower. I'd recommend MetroVac, I got a Master Blaster and it has enough force to bow a door panel in, not permanently but it clears water off the surface of the car and out of hard to reach areas and shuts so quickly.
If you have a decent protective coat on the car or wax, it makes light work of cleaning if used in combination with snow foam.
I got fed up with microfibre towels - they're good for 1 or 2 uses before their selling point becomes their failure (picking up particles which scratch).
-
- Similar Topics
- Replies
- Views
- Last post
-
- 13 Replies
- 3195 Views
-
Last post by bobajob
-
- 16 Replies
- 3363 Views
-
Last post by 2japs
-
- 7 Replies
- 2204 Views
-
Last post by Jim S
-
- 26 Replies
- 1754 Views
-
Last post by Jon A
-
- 10 Replies
- 3680 Views
-
Last post by Wing Commander