surround camera image

Technical Forum for the Porsche Macan
Posts: 1327
Joined: Fri Mar 11, 2016 2:23 pm
Location: South Wales

Re: surround camera image

Post by Ferdie » Sun Apr 08, 2018 5:04 pm

If that is the surround view you are getting that is pretty disappointing, I think the OPC’s are not well equipped if they can’t get better result than that, understand your disappointment there.

On another thread VanB, WinCo and I debated turbo-lag Vs. economy figures Vs. in-experienced drivers - and it seemed likely that Porsche may have softened the SUV’s responses in Normal/Comfort mode for all or any of those reasons. I found that 95% of the time normal mode was absolutely fine on the SD, only 5% of the time did I put it in Sport to keep the engine running and depart swifter in to tighter gaps but I would often have to be ready to apply brakes after joining traffic I found that perfectly acceptable. I guess your needs are different there and I don’t know if the, GTS, is different of the mark in normal mode, interesting to know?
991.1 C2 - Black Edition
(Prior) Macan SD - Night Blue
Fordson Dexta - 1960

User avatar
Posts: 325
Joined: Sun Apr 30, 2017 3:33 pm
Location: Essex

Re: surround camera image

Post by andreas » Sun Apr 08, 2018 5:58 pm

CharlesElliott wrote:
Sat Apr 07, 2018 9:00 pm
Like this?

This has to be some sort of calibration error. The black rectangle on mine is perfectly centred on the car, and I've found the surround view superb for parking alongside kerbs.
Macan S collected 4 Dec 2017 - Jet Black, 20" SportDesign wheels, Agate/Pebble leather, 18-way seats, comfort memory, seat heating, Light Comfort pack, Pano roof, Bi-Xenons with PDLS, Surround View, PASM, Power Steering Plus, spare wheel, towbar.

Posts: 899
Joined: Sat Aug 20, 2016 9:11 pm

Re: surround camera image

Post by CharlesElliott » Sun Apr 08, 2018 6:02 pm

It only happens on mine very occasionally -by coincidence it happened when I was reading this thread!

Posts: 277
Joined: Sat Sep 10, 2016 3:29 pm

Re: surround camera image

Post by Sidscott » Sun Apr 08, 2018 6:13 pm

Has anyone on here had any luck having their surround cam re- calibrated successfully by their OPC or is it not possible?

Post Reply