Macan S II rear badge placement measurements

Interior and Exterior bodywork Issues and Fixes
Post Reply
AllanG
Posts: 954
Joined: Fri Oct 02, 2020 8:00 am
Location: Southampton

Post by AllanG »

Hi All,

I’m shortly due to pick up my used Macan S II, however, as the car was originally specced with the model designation deletion option, I’m considering to fit the rear Macan S badge.

As I’m not sure of the exact placement of this badge, would any Macan S II owner be so kind as to send me the following measurements, in millimetres, in relation to the attached photo:-

A - from the edge of the O to the edge of the M
B - from the edge of the H to the edge of the S
C - from the bottom of the Macan lettering to the bottom edge of the boot lid
D - from the bottom of the plastic trim to the top of the M, and from the boot crease line to the top of the M
E - from the bottom of the plastic trim to the top of the S, and from the boot crease line to the top of the S
F - from the boot crease line to the top of the a & c letters
G - from the bottom of the S to the bottom edge of the boot lid

Many thanks,

Allan

724E4AE8-9C66-45C5-96B7-1AA84D025A07.jpeg

Allan
2023 Macan S in Crayon

User avatar
SAC1
Posts: 3784
Joined: Wed May 24, 2017 8:24 pm
Location: near BATH

Post by SAC1 »

Your OPC has a template to do it accurately.
Steve

2020 GTS in Sapphire Blue
(sold) 2017 SD in Rhodium Silver
AllanG
Posts: 954
Joined: Fri Oct 02, 2020 8:00 am
Location: Southampton

Post by AllanG »

When I asked my OPC, they said the template covers the complete boot lid, and is only issued to a body shop...so not much help to me!
Allan
2023 Macan S in Crayon
Toddie
Posts: 463
Joined: Thu Jan 16, 2020 2:45 pm

Post by Toddie »

SAC1 wrote: Fri Nov 13, 2020 12:27 pm Your OPC has a template to do it accurately.
Really ? you could have fooled me my OPC had 3 goes at getting it right!! No names mentioned.
2017 Macan S, Carrara White Metallic, Agate Grey Leather, 21” 911 Turbo Design wheels.
User avatar
SAC1
Posts: 3784
Joined: Wed May 24, 2017 8:24 pm
Location: near BATH

Post by SAC1 »

Toddie wrote: Fri Nov 13, 2020 1:34 pm
SAC1 wrote: Fri Nov 13, 2020 12:27 pm Your OPC has a template to do it accurately.
Really ? you could have fooled me my OPC had 3 goes at getting it right!! No names mentioned.


As already discussed on this Forum.....search.php?keywords=lettering+template
Steve

2020 GTS in Sapphire Blue
(sold) 2017 SD in Rhodium Silver
AllanG
Posts: 954
Joined: Fri Oct 02, 2020 8:00 am
Location: Southampton

Post by AllanG »

SAC1 wrote: Fri Nov 13, 2020 1:52 pm
Toddie wrote: Fri Nov 13, 2020 1:34 pm
SAC1 wrote: Fri Nov 13, 2020 12:27 pm Your OPC has a template to do it accurately.
Really ? you could have fooled me my OPC had 3 goes at getting it right!! No names mentioned.


As already discussed on this Forum.....search.php?keywords=lettering+template
Thanks for this link, but none of them show the measurements I’ve asked for, and some even relate to the Mk1 Macan, which is not the same as a Mk2 boot lid.
Allan
2023 Macan S in Crayon
CharlesElliott
Posts: 984
Joined: Sat Aug 20, 2016 9:11 pm

Post by CharlesElliott »

Macan GTS: PH1UFLL8
AllanG
Posts: 954
Joined: Fri Oct 02, 2020 8:00 am
Location: Southampton

Post by AllanG »

Thanks for this link, but I’m certainly not paying $135 plus postage for a template!! 🤑🤑

Surely there must be a forum member with a Macan S II who has the reward badge who can kindly take the measurements for me??
Allan
2023 Macan S in Crayon
MikeM
Posts: 2234
Joined: Tue Nov 17, 2015 11:13 pm

Post by MikeM »

AllanG wrote: Sat Nov 14, 2020 10:03 am
Thanks for this link, but I’m certainly not paying $135 plus postage for a template!! 🤑🤑

Surely there must be a forum member with a Macan S II who has the reward badge who can kindly take the measurements for me??
It’s not difficult to set up, take a look at the photo below. For the vertical the centre of any badge size/configuration whether it be the example, the S, GTS etc) is always centred to the “S” in PORSCHE, which is also the centre of the wiper rotor and the bottom skirt strengthener. For the horizontal, the bottom of the lettering lines up with the lower fold of the tail gate lamp recess. You can set this up with just masking tape, a non permanent fine line marker and a suitable spirit level. Trial place it and double check alongside a few decent photo examples before committing.
p.s the example is not my car 🤢

D51FDA0B-8743-4361-9144-5C3EE6830978.jpeg

Previous Porsche’s
2008. 987 Boxster S Sport basalt
2012. 991 Carrera S aqua
2016. Macan Turbo volcano
Current
2020. Macan GTS crayon
2024. Macan GTS gentian sometime this year https://configurator.porsche.com/porsche-code/PR8H7WC6
AllanG
Posts: 954
Joined: Fri Oct 02, 2020 8:00 am
Location: Southampton

Post by AllanG »

Many thanks @MikeM....much appreciated!
Allan
2023 Macan S in Crayon
Post Reply

  • Similar Topics
    Replies
    Views
    Last post